Hand grenade remote actions, It is designed to engage manpower in offensive combat. Housing grenades made of metal. It is used for explosive charge premises, as well as for the formation of the explosion fragments. It consists of two outer and two inner caps connected to each other. The upper caps has a hole, in which the tube is fixed to place a fuse grenade. In the service opening closed circulation tube stopper. Inside the case is placed explosive charge.
The grenade fuse used UZRGM, intended to undermine grenades through 3,2-4,2 seconds after throwing. Ignitor casing is made of metal. It is the trigger mechanism. Inside the case is fixed washer, directing traffic drummer. On the fuse body worn threaded sleeve, by means of which is screwed into the grenade fuse. The detonator has a metallic housing, inside of which the primer, retardant powder and detonator cap.
In the service outstanding drummer loaded mainspring and fixed safety lever fork, meshing with its shank. Action spring abuts against the upper end of the guide washer body, and the lower washer to the firing pin, and a safety arm fixed by means of a safety pin checks, passing through the openings of lugs of the lever and the housing wall aperture fuse safety checks lever is held at the time of throwing, under the action of spring lever rotates and releases the hammer. Drummer under the action of mainspring prick blasting vosplamenshel, a ray of fire from which are transmitted to a moderator, and after burn retardant in charge detonator, that leads to an explosion of the charge grenades.
Diameter 58 mm
housing height 76 mm
Height with primer 117 mm
Weight grenades 0,310 kg
BB Weight 0,11 kg
Type BB TNT
deceleration time 3,2-4,2 seconds
The radius of continuous defeat to 5 m
The radius of the expansion of individual fragments to 25 m
The explosion grenade RGD-5